Apple iPhone 14 Pro Max aluminum plate drawings revealed, camera module bulge 4.17 mm

Yesterday, a person familiar with the matter said Apple has already started trial production of iPhone 14 and plans to mass produce it in August. At the same time, accessory manufacturers have probably also gotten the iPhone body data and are preparing to produce cell phone films, cases and other accessories for the new iPhone. Yesterday, an iPhone 14 bar user named "Apple Shenzhen Foxconn production staff" exposed the aluminum drawings for the Apple iPhone 14 Pro Max accessories.

The drawings show that the iPhone 14 Pro Max has a 6.7-inch screen and a body size of 160.71 x 78.58 x 7.85mm, which is 0.09mm shorter, 0.48mm wider and 0.2mm thicker than the iPhone 13 Pro Max.

It's also worth noting that the camera module on the iPhone 14 Pro Max is bulging out badly, already 4.17mm above the body, which will cause the iPhone 14 Pro Max to shake badly when placed flat on a table. This size will also result in a heavier case for users who want to protect the camera module with a case.

iPhone 14 Pro rendering

IT Home has learned that the prominence of the iPhone 14 Pro Max camera module corresponds to the upgrade of the new camera. Previously revealed, the iPhone 14 Pro / Pro Max will have 48MP+12MP+12MP cameras on the rear and support 8K video recording. Other configuration, iPhone 14 Pro / Pro Max will be equipped with A16 Bionic chip, with 8GB of memory, with 128GB, 256GB, 512GB and 1TB versions of storage, support AOD rest screen display, support Face ID, pre-installed iOS 16 system. The iPhone 14 Pro and Pro Max will have a battery capacity of 3200mAh and 4323mAh respectively, and the iPhone 14 Pro and Pro Max will have a new "pill and hole screen" instead of the previous bangs screen.